Bash Guard M
Bash Guard M – Black Pronger
bash guard M – Black Rounder
Bash Guard M – Orange Pronger
Bash Guard M – Orange Rounder
Bash Guard M
Bash Guard M – Cable Clips
Bash Guard M
Bash Guard M
Bash Guard MBash Guard MBash Guard MBash Guard MBash Guard MBash Guard MBash Guard M - Cable ClipsBash Guard MBash Guard M

Bash Guard M (single) – for Boosted Boards

$15.00

5.00 out of 5 based on 1 customer rating
(1 customer review)

 

DISCLAIMER:

No guard can protect your equipment from all possible types of collisions. flatland3d makes no guarantees of protecting any part of your board, remote, or other equipment from damage in the event of a collision. If you have any issues with our products, please don’t hesitate to reach out to us at info@flatland-3d.com. Our Bash Guards and other equipment guards are not safety devices. They do not protect the rider in any way. Skateboarding of any kind is a dangerous sport. Always wear a helmet, and live to ride another day!

NOTICE REGARDING SAFETY EQUIPMENT:

The flatland3d e-skate glove has been designed and tested to reduce the risk of a specific type of injury sustained during typical skateboarding falls. They are not to be used for any other purposes including, but not limited to: performing highly dangerous stunts, subjecting them to extreme impact, or using them for any commercial applications whatsoever. While every effort has been made to ensure that our products meet your reasonable satisfaction, we cannot guarantee that our products will protect you in all circumstances.

INTERNATIONAL SHIPPING (Customs, Duties & Taxes):

Orders shipped outside of the United States may be subject to import taxes, customs duties and fees levied by the destination country. The recipient of an international shipment may be subject to such import taxes, customs duties and fees, which are levied once a shipment reaches the recipient’s country. Additional charges for customs clearance must be fulfilled by the recipient; flatland3d has no control over these charges, nor can flatland3d predict what they may be. flatland3d is unable to mark shipments as gifts or adjust declared values on international shipments. Customs policies vary widely from country to country; you should contact your local customs office for more information. When customs clearance procedures are required, it can cause delays beyond our original delivery estimates.
Note:
Customs offices in some countries require the importer of record (recipient) to provide a particular form of identification before releasing a shipment. You may be required to provide an identification number such as a Unique Identification Number, CPF, or Tax ID. Countries that require an identification number include: Brazil, Chile, China, Ecuador, India, Israel, Peru, Qatar, South Africa, South Korea, Taiwan, and Turkey.

WARRANTY:

flatland3d offers a 12 month limited warranty against manufacturing defects. flatland3d will make the final judgement at their discretion to whether any damage qualifies as a defect, or is normal wear and tear. If it is determined a defect exists, flatland3d will repair or replace the damaged part free of charge, within a reasonable amount of time. Reach out to us at info@flatland-3d.com if you have questions about our warranty or to make a claim.

RETURN POLICY:

Should you decide to return your purchase, flatland3d will accept returns on unused products for a full refund. Use the same packaging, or repack the items carefully to avoid shipping damage, and send them our way. Once we receive the items, we will refund the full purchase price and the original shipping charge. The customer is responsible for return shipping. Packages sent from outside the U.S. should be marked as RETURNS on the outside of the package. Email us at info@flatland-3d.com to begin the return process and for our return shipping address.

LIABILITY:

flatland3d shall not be liable for any personal injury you suffer as a result of using our products except to the extent such injury is caused by our negligence.
You agree that flatland3d products are used at your own risk and flatland3d products do not claim to protect you from any or all personal injury which may occur during their use.

Product Description

This updated version of the Original Bash Guard from flatland3d is now made from injection molded ABS plastic for a smoother, more streamlined outer aesthetic. This new design provides the same protection and function you’ve come to expect from flatland3d. Designed as a direct replacement for the stock riser on your Boosted Board V2 (also compatible with V1 boards), the Bash Guard M will provide protection to the nose or tail of your deck without any effect to the ride feel or dynamics. Choose Pronged or Rounded versions, and either Orange or Black. The Bash Guard M is sold individually, and it’s in stock now and ready to ship!

Check out our How-To section to see how it all goes together.

Peripherals

Indicate where each individual Bash Guard will be mounted to be sure you get the correct peripherals (included for free):

  • Set of 2 Cable Clip M’s if it’s for the tail of a V2
  • no extras needed for the nose of V2
  • 1/16″ Hard Riser if it’s for a V1

Clear

Subscribe to Updates

Product Description

This updated version of the Original Bash Guard from flatland3d is now made from injection molded ABS plastic for a smoother, more streamlined outer aesthetic. This new design provides the same protection and function you’ve come to expect from flatland3d. Designed as a direct replacement for the stock riser on your Boosted Board V2 (also compatible with V1 boards), the Bash Guard M will provide protection to the nose or tail of your deck without any effect to the ride feel or dynamics. Choose Pronged or Rounded versions, and either Orange or Black. The Bash Guard M is sold individually, and it’s in stock now and ready to ship!

Check out our How-To section to see how it all goes together.

Peripherals

Indicate where each individual Bash Guard will be mounted to be sure you get the correct peripherals (included for free):

  • Set of 2 Cable Clip M’s if it’s for the tail of a V2
  • no extras needed for the nose of V2
  • 1/16″ Hard Riser if it’s for a V1

Additional Information

Weight N/A
Style

Pronger (1x), Rounder (1x)

Color

Orange, Black

Mounting location

V2 Tail (Free Cable Clip M's included), V2 Nose (no extras needed), V1 Nose or Tail (Free 3d printed 1/16" Hard Riser included)

1 review for Bash Guard M (single) – for Boosted Boards

  1. Rated 5 out of 5

    (verified owner)

    They fit like a glove on my Dual Plus v2 and look great!

Add a review

Your email address will not be published. Required fields are marked *

Are you human? *